Warehouse hall with tall pallet racking in several rows

Monitor high-bay warehouses, detect misalignment early.

In the automated warehouse, alignment determines operation. Even a settlement of the foundation brings racking out of alignment. Wireless tilt sensors capture the angle change long before it becomes visible, and notify automatically when the stored threshold is exceeded.

Request a quote What misalignment triggers

Benefits for operations

Misalignment announces itself before you can see it

Settlement develops over weeks. Whoever measures it decides calmly about the intervention, instead of stopping the system when a pallet jams.

Request a quote

Detect deviation early

The sensor technology captures angle changes that are not noticeable to the naked eye. The development becomes visible while it is happening, not only at a failure.

Plan maintenance proactively

The trend shows when intervention becomes necessary. The measure follows the condition, not the calendar.

Avoid operational interruptions

An unplanned shutdown in the automated warehouse costs more than the repair itself. Detected early, the intervention can be scheduled into an operating pause.

Safety for people and goods

Staff, stacker cranes and stored goods are all equally affected by misalignment. The alert reaches those responsible immediately, on request additionally acoustic or visual on site.

Aisle between two tall rows of pallet racking in a warehouse

What is at stake

Millimetres at the frame, standstill in the installation

An automated warehouse is designed for dimensional accuracy. If the geometry changes, it immediately affects the process.

  • The precise alignment of the racking is lost
  • The clearances to the stacker cranes change
  • The automated storage and retrieval process is disrupted
  • Pallets jam
  • Goods fall down

How it works

Four steps from measuring point to notification

The sensor technology requires no interference with the warehouse technology and can be retrofitted in a running installation.

  1. 01

    Define measuring points

    The sensors sit at the critical points of the installation, typically in the upper area of the racking frames. That is where settlement of the foundation has the most noticeable effect.

  2. 02

    Capture tilt

    Wireless tilt sensors, also called inclinometers, capture the smallest angle deviations of the frame. The sensor resolves changes from 0.001 degrees.

  3. 03

    Measure settlement as well

    For the vertical displacement, tilt sensors with an integrated distance sensor are used. This makes settlement measurable in the millimetre range, together with the angle change in a single device.

  4. 04

    Transmit and alert

    The battery-powered sensors transmit wirelessly to a central gateway, in real time or at a freely chosen interval. If a value exceeds the stored threshold, the system notifies automatically.

Matching product

The sensor on the racking frame

On the racking frame, a single device measures both: the angle deviation of the frame and, with an integrated distance sensor, the vertical displacement.

Infrasolute tilt sensor with radio antenna, cut out

Tilt sensor for structures

Configuration, number of measuring points and price are agreed with you as part of the project inquiry, tailored to your installation.

Measured variables
Tilt and settlement
Tilt measurement
from ±0.001°
Settlement detection
down to 0.1 mm
Power supply
battery-powered
Data transmission
wireless to a central gateway
Measurement interval
real time or freely selectable
To the tilt sensor Request a quote

From practice

Hundredths of a degree over several weeks

On a 15-metre-high row of racking, measurement over several weeks showed a gradual tilt increase of a few hundredths of a degree. The system raised the alarm in good time, before the misalignment became visible.

Example from an Infrasolute project.

Infrasolute data platform on a laptop, with the measurement history of a sensor over several weeks The same platform on a smartphone, with a list of sensors and their current readings

Matching solutions

What is monitored at the warehouse

The racking and the hall above it, individually or together in the same portal.

Tilt & settlement monitoring

Tilt & settlement monitoring

Continuously capture angle change and settlement on the racking frame, with an alert when a threshold is exceeded.

Learn more
Structural & roof monitoring

Structural & roof monitoring

The hall above the warehouse: laser-based deflection measurement with early warning before overload from snow, rain and wind.

Learn more

Everything from a single source

From the monitoring concept to ongoing operation

You do not get individual parts, but a complete solution and a single point of contact for the entire monitoring of your installation.

01

Concept

We determine the critical racking locations, the number of measuring points and the threshold values, tailored to the installation and warehouse operation.

To the service
02

Installation

On request, we mount the sensor technology on the frame and commission the monitoring with a baseline measurement, without interfering with the warehouse technology.

To the service
03

Maintenance and operation

We keep the sensor technology and transmission operational and update the configuration whenever the installation changes.

To the service
04

Monitoring and alerting

We observe the trend continuously and report every threshold exceedance to the responsible party.

To the service

Monitoring for your high-bay warehouse

Tell us about the installation and the critical racking rows. We align measuring points, threshold values and sensor technology with your warehouse operation.

Request a quote View references
Christian Steffes Christian Steffes

Data platform

All readings on one platform

The sensors transmit their readings wirelessly to the data platform, where they are evaluated, documented and continuously checked against your thresholds.

  • AI-assisted data analysis
  • User-focused reporting
  • Continuous evaluation
  • Warning and alarm thresholds
  • Alerts by email and text message
  • Remote access around the clock
More on monitoring & alerting
Monitoring platform Sample view
Reading history within limits
Warning threshold
  • AI-assisted data analysis Condition within limits
  • User-focused reporting Report ready
  • Alerting Thresholds monitored
FAQ

Frequently asked questions about high-bay warehouse monitoring

Why is a visual check in the warehouse not enough?
Because the change begins long before the visible misalignment. In the practice example, the increase over several weeks was a few hundredths of a degree. Nobody notices that in passing, but for automated operation it is already enough to change clearances and processes.
Where are the sensors mounted?
At the critical locations of the installation, typically in the upper area of the racking frames. That is where settlement of the foundation has the most noticeable effect as an angle change. Which racking rows and which points that are in the specific warehouse is clarified during the concept phase.
Does the sensor technology need cables or a power connection?
No. The sensors are battery-powered and transmit their readings wirelessly to a central gateway. This means they can also be retrofitted in an installation that is already running, without laying lines in the racking.
How often is measurement taken?
That is adjustable. Possible options are transmission in real time or freely chosen intervals. Which rate makes sense depends on how quickly the observed movement develops.
How am I informed about a deviation?
If a reading exceeds the stored threshold, the system automatically triggers a notification. On request, an additional acoustic or visual alert can be set up directly on site, so the notification also reaches people in the hall.
Is settlement measured alongside tilt?
Yes. The angle change is captured by the tilt sensor technology. For the vertical displacement, tilt sensors with an integrated distance sensor are used, making settlement measurable in the millimetre range. Which version suits which measuring point is defined during the concept phase.

Project inquiry

Secure your warehouse installation

Tell us about the installation and the question at hand. You will receive a reliable initial assessment shortly, including suitable measuring points and sensor technology.

+49 6742 8599600 DE +41 41 670 00 11 CH [email protected]
Project inquiry