Crack monitoring: monitor cracks in structures wirelessly

Continuous crack monitoring with wireless sensors: you detect crack width changes from 0.003 mm, are alerted immediately at thresholds and keep track of the condition of your structures at all times.

DIN 4150RIL 883
Infrasolute crack sensor above a crack, with displacement transducer and millimetre scale

Your benefits

What crack monitoring delivers in operation

A crack is rarely harmless and rarely static. Continuous monitoring shows whether it is dormant or active, before it becomes a structural problem.

Request a quote

Early warning instead of a damage pattern

You see how a crack develops before a hairline crack becomes a structural problem. Automatic alerting when a threshold is exceeded gives you time to react in a targeted way.

Installed without running cables

The sensors transmit via NB-IoT and can be fitted by your own team. No cabling, no scaffolding just for the measuring equipment, no recurring on-site readings.

Reusable and economical

Using the mounting plate, you remove the sensor and reinstall it at the next structure. This significantly reduces the cost per measuring point compared with permanently installed technology.

Data from anywhere

All readings flow into the cloud-based Infrasolute software. Crack width and temperature are displayed graphically, stored as history and available at any time.

Wireless crack sensor mounted on both sides of a crack

How it works

How the crack monitoring system works

Instead of spot-check visual inspection, wireless sensors record crack width continuously and automatically. You see not only that a crack has changed, but when, how quickly and in what relationship to temperature.

  1. 01

    Mounting

    The crack sensor is fixed on both sides of the crack using a mounting plate, by your own team, without special tools.

  2. 02

    Measurement

    The integrated displacement transducer records changes in crack width from 0.003 mm, plus surface and concrete temperature, at a freely selectable interval.

  3. 03

    Transmission

    Readings are sent to the cloud via Narrowband IoT (NB-IoT) with low power consumption, even from remote or hard-to-reach locations.

  4. 04

    Alerting

    If the crack width exceeds the stored threshold, the system triggers an alert immediately. No waiting until the next inspection.

Simulation

The crack grows, the alert comes immediately

Concrete expands in heat and contracts in cold. A separation crack therefore becomes wider at night and in winter and narrower again during the day, without anything having changed at the structure. Only the temperature-corrected trend shows whether a crack is really growing. Start the threshold scenario and see when the alert is triggered.

Crack width Threshold 0.50 mm
Calm condition
0.20 0.30 0.40 0.50 0.60 mm Day 1Day 15Day 30

Within target range

Crack width around 0.32 mm, threshold 0.50 mm

Demonstration only

Crack monitor, manual or digital

Why the digital crack monitor shows more than an on-site reading

Manual checks deliver snapshots a week apart. It is precisely in these gaps that critical changes develop unnoticed.

Analogue

Classic crack monitor

A plastic marker placed over the crack, read against a grid. Reasonable for an initial assessment, with two weaknesses.

  • Someone has to take readings on site regularly
  • Shows only the current state, not the trend
  • The moment of a sudden movement remains unknown

Digital

Digital crack monitoring

Instead of a weekly reading, the wireless sensor measures independently and reports changes automatically.

  • A continuous record instead of a snapshot
  • Crack width changes from 0.003 mm captured
  • Robust documentation for third parties

Because the sensor also measures surface and concrete temperature, the thermal expansion and contraction of the component can be factored out. Only this corrected trend reliably shows whether a crack is actually growing, and prevents false alarms.

Matching products

Two variants: long-term or live

For crack movements over weeks, months and years, the crack sensor comes in three versions: the measuring principle, mounting and connectivity stay the same, only the power supply differs. For events that take seconds, there is the Crack Sensor Live. The two can be combined.

Feature ALong-term BLive Live
QuestionHow does the crack develop over months and years?What happens at the crack within the seconds of a load?
Measuring rate1 to 480 times a day1 to 10 readings per second
TransmissionNB-IoTLTE live, in parallel to a USB stick
PowerSolar, long-life battery or mains powerLive gateway with solar, mains power or buffer battery
DurationMonths to yearstypically days to weeks, permanently where mains power is available
Typical usesEvidence preservation, between structural inspections, accompanying repairsHeavy vehicles crossing, load tests, construction work nearby
A

Long-term variant

Crack sensor in three versions: measures at an interval, transmits via NB-IoT, for the trend over months and years.

Infrasolute crack sensor solar with an upright solar cell and mounting bracket

Crack sensor solar

Powered entirely by the integrated solar cell. For outdoor areas with sufficient daylight, without cables and without changing batteries.

Power supply Solar technology, autonomous
Learn more
Measuring point with a permanently connected evaluation unit and several displacement transducers on a hall floor

Crack sensor mains power

Connected permanently to an existing power supply instead of solar or battery.

Power supply fixed mains connection
Infrasolute crack sensor with a long-life battery, mounted on a facade above a crack

Crack sensor long-life battery

For shaded, covered or enclosed situations without daylight. Same specifications as the solar version, powered by a long-life battery.

Power supply long-life battery
B

Live variant Live

Crack Sensor Live on the live gateway: measures second by second, transmits via LTE, for load events and short-term investigations.

Live gateways with connected displacement transducers on a bridge pier

Live variant

Crack Sensor Live

For crack movements that take seconds, such as heavy vehicles crossing or load tests. Up to four displacement transducers are connected by cable to the live gateway, which transmits the readings to the platform via LTE and stores them on USB in parallel.

Measuring rate
1 to 10 Hz
Resolution
0.001 mm
Transducers per gateway
up to four
Cable length
up to 50 m
Transmission
LTE and USB
Gateway power
Solar, mains or buffer

Live and long-term combined

Understand first, then monitor

The two variants complement each other. A live phase shows how the crack responds to traffic and temperature. With this knowledge, thresholds and the measuring interval for long-term monitoring are set, using the same displacement transducers on the same crack.

  1. 01

    Define requirements

    With the operator and the structural engineers: which cracks, which questions, which measuring points.

  2. 02 · LIVE

    Live phase

    For example four weeks at 1 to 10 Hz, live to the platform via LTE and in parallel to USB.

  3. 03

    Analysis

    Load events, temperature cycle and comparison with traffic data show the normal behaviour of the crack.

  4. 04

    Re-plug

    The same displacement transducers are connected to the long-term gateway via IP68 connectors, without remounting.

  5. 05 · LONG-TERM

    Long-term

    Hourly values via NB-IoT, trend and alerting with the thresholds from the live phase.

What operators gain

Thresholds based on measured normal behaviour

The live phase shows how far the crack usually moves under traffic and temperature. Warning and alarm thresholds are set above this instead of being estimated: normal movements do not trigger alarms, real changes stand out.

Understanding the structure

Load, temperature and trend are separated. This shows whether a crack is active, where its movement comes from and how strongly heavy traffic acts on it, a sound basis for structural analysis, reassessment and decisions about the structure.

The right measuring interval

The live data show which interval is sufficient for the long-term phase. In the project for Die Autobahn GmbH, four readings per day captured a median of 96 % of the daily fluctuation; hourly readings captured it completely.

Install once

The displacement transducers stay on the crack; only the gateway is changed. Long-term measurement follows the live phase without a second installation visit.

Measure live when the load arrives: on a motorway bridge in Hanau, the Crack Sensor Live is switched on by SMS for the time windows in which heavy transports for the SuedLink power line cross. It then switches itself off. On a Deutsche Bahn railway bridge, by contrast, it takes readings at 10 Hz around the clock, powered by a solar module, and triggers the alarm chain immediately when a threshold is exceeded.

Typical applications

From condition surveys to long-term monitoring

Wherever crack movement must be documented over time: for clients and neighbours, for structural inspection, and in your own structural documentation.

  • Condition surveys for construction work and excavation pits nearby
  • Cracks in bridges and civil engineering structures
  • Supplementing structural inspection to DIN 1076 between inspection dates
  • Settlement cracks on existing and commercial structures
  • Cracks in masonry on existing and heritage structures
  • Long-term monitoring after refurbishment or repair

From practice

Crack monitoring on an existing bridge

Crack monitoring on a bridge in Bonn

Crack monitoring, bridge in Bonn

After a flood, cracks appeared on the structure. Until the planned replacement is built, sensors monitor crack widths online.

Structure type
Bridge
Location
Bonn
Sensors
Crack sensors with long-life battery
View project in detail

Matching industries

Where we deploy crack monitoring

Infrasolute platform

Crack widths over time on the platform

Crack width read against temperature, trends over months: this is how crack measurement becomes a finding.

Platform modules

The platform at a glance
Annual trend of temperature and displacement on the Infrasolute platform
Sample view

Crack monitoring for your structure

Whether a single crack or several measuring points on a large structure, we align measuring points, thresholds and sensor variant with your task.

Request a quote
Benedikt Seuss Benedikt Seuss
FAQ

Frequently asked questions about crack monitoring

What distinguishes the digital crack monitor from the classic one?
The classic crack monitor is a plastic marker. It is placed over the crack and read against a grid. The crack monitor therefore shows the condition at the moment someone stands in front of it. The digital crack monitor measures itself, at a freely selectable interval, and sends the readings by radio into the software. This produces a continuous trend, and if the threshold is exceeded the system triggers an alert.
How can a crack in masonry be monitored?
The sensor is fixed on both sides of the crack using a mounting plate, which works on masonry as well as on concrete. It records the change in crack width from 0.003 mm and transmits it by radio. Permanent measurement is particularly useful on existing and heritage structures, because settlement there develops over long periods and can easily be missed with a weekly inspection.
How does crack monitoring support condition surveys?
Before construction work begins, the baseline condition is recorded, after which the measurement runs continuously. This means a value is available for every point in time, instead of two photos taken weeks apart. If a change is later claimed, it can be placed precisely in time against the trend. The condition survey itself is carried out by your expert; we deliver the continuous measurement series as the basis for it.
How does crack monitoring relate to structural inspection to DIN 1076?
Inspection to DIN 1076 assesses the structure at scheduled intervals. Crack monitoring fills the time in between with readings and reports a threshold exceedance as soon as it occurs. It does not replace the inspection; it gives the inspecting engineer a documented trend instead of a snapshot for the next inspection date, and the measurement series feeds into the structural documentation.
How are settlement cracks documented over a longer observation period?
Settlement develops over months to years, so the crack grows correspondingly slowly. The sensor measures at a freely selectable interval and also records temperature, so that temperature-related opening and closing can be separated from genuine settlement movement. The readings produce a continuous trend over the entire observation period, which can be carried over into the structural documentation.
What crack width change can crack monitoring detect?
The displacement transducer records changes in crack width from 0.003 mm. This means you also detect slow, gradual movements that would go unnoticed for months under manual inspection. The sensor additionally measures surface and concrete temperature, so that temperature-related crack movement can be separated from genuine structural change.
Is the crack sensor suitable for outdoor use?
Yes. The sensors are waterproof to IP67 and optimised for harsh outdoor environments such as bridges, dams or facades. The solar version operates fully autonomously without an external power source, and a long-life battery variant is also available. Both versions are designed for permanent outdoor monitoring.
Do I need to commission a specialist firm for crack monitoring?
No. The sensor is fixed on both sides of the crack using a mounting plate, which can be done by your own team without special tools. On request, Infrasolute assists with selecting the measuring points and configuring the thresholds, so that crack monitoring delivers robust data from the start.
Can I monitor several cracks with one system?
Yes. One sensor can be extended with up to 20 additional wired crack transducers. This lets you cover several cracks on one structure through a shared data transmission and keep all measuring points in view on a single interface.
How often does the crack monitor take a reading?
The measurement interval is freely configurable, from once a week to one measurement every three minutes. This lets you adapt the resolution to the criticality of the structure: closely spaced during an acute observation phase, more sparing during calm long-term monitoring.
How are the readings evaluated in crack monitoring?
The crack widths come together on the Infrasolute platform. There they are continuously checked against the warning and alarm thresholds and read against temperature, so that the temperature-related breathing of a crack can be distinguished from genuine crack growth. AI analytics flags anomalies in the trend, and from long data series the platform derives trends for further development.

Project inquiry

Let's talk about your structure

Tell us about your structure and the question at hand. We will get back to you shortly and work out with you which measuring points and sensors fit your task.

[email protected]
Project inquiry