Leak monitoring: a water leak detection system for your building

Reliable leak detection in the basement and throughout the building. Prevent water damage before it happens, with automatic alerts by SMS and email.

Why leak monitoring

Why leak monitoring in the basement matters most

The basement is one of the most common places for undetected water damage. A leak monitoring system identifies problems before they turn into expensive remediation cases.

Request a quote

Early detection

Detects burst pipes, leaking heating systems and creeping moisture immediately, instead of only after weeks.

24/7 monitoring

Round-the-clock protection for your property, even when no one is on site.

Smart alerting

Instant notification by SMS or email as soon as moisture rises.

Simple installation

No structural work required. The cable is rolled out, the water leak sensor mounted, done.

Ideal for buildings

Perfect for single-family homes, basements, technical rooms and holiday homes.

Retrofittable

Easily integrated into existing buildings, low cost with high impact.

Two ways

Leak detection cable or water leak sensor

Both detect water on the same principle and report via the same platform, with alerts by SMS and email. The difference: the cable monitors runs and areas, the water leak sensor individual, known points of risk.

Leak detection cable at the gateway on a wet floor area Runs and areas

Leak detection cable

The cable is sensitive along its entire length and is rolled out wherever water could escape anywhere.

  • Usually up to 40 m per cable
  • On the floor, under appliances, in the screed or in insulation
  • After an alarm, a measurement on the cable narrows down the area
  • Gateway with mains power or battery
Water leak sensor with two probes and connecting cable, cut out Individual points

Water leak sensor

The sensor sits exactly where water arrives first, and every alert is assigned to that point.

  • Compact, 2.5 × 7 × 5 cm, can also be mounted flush with the floor
  • Also measures moisture up to 6.5 % by mass
  • Up to 4 or 20 sensors per gateway, alternatively one gateway per room
  • Reading every 15 minutes, mobile network or Wi-Fi

Both can be combined, for example cables in the bathrooms and water leak sensors in the boiler room. We work out which solution fits from your floor plans.

Leak detection cable on a wet floor area as part of a water leak detection system

How it works

How does the leak detection system work?

The heart of the system is the leak detection cable. It is laid along potential trouble spots, under washing machines, heating systems or along walls. A small smart gateway (mains power or battery) captures the data and monitors moisture continuously. For individual, known points of risk, the water leak sensor is the alternative.

  1. 01

    Detection

    As soon as the cable comes into contact with water, its electrical resistance changes.

  2. 02

    Recognition

    The system registers this change within milliseconds and reliably.

  3. 03

    Alerting

    You immediately receive an SMS or email before major damage occurs.

Made in Germany

Development

Fully developed in Germany.

Made in Germany

Server location

Servers entirely in Germany.

Made in Germany

Manufacturing

System production in Germany.

The difference

The difference pays off

One water leak, two scenarios. See what happens when no one is warned in time, and what runs differently with leak monitoring.

Without leak monitoring

Critical Mould \u20ac10,000+
  • Leak goes unnoticed for weeks
  • Water seeps deep into walls and screed
  • Mould growth endangers health
  • Costly drying and expensive remediation (often over €10,000)
  • Months of stress with contractors and insurers

With the Infrasolute system

Protected \u20ac0 damage

SMS alarm!

In < 1 second

  • Immediate alarm at the first drop of water
  • The cause can be fixed quickly
  • No consequential damage to the building fabric
  • Low cost, only the system purchase
  • Back to worry-free living right away

Modularity

A modular system, you decide

Choose flexibly between different transmission and power supply options, tailored precisely to your project.

Option A

Data transmission

  • Offline operation

    Local warning directly via an LED on the gateway, entirely without a network.

  • Local Wi-Fi

    The Wi-Fi credentials are stored via an SD card. The gateway connects and transmits the data to the cloud.

  • Cellular (SIM)

    Fully self-sufficient: the gateway transmits the data to the cloud via an integrated SIM card.

Option B

Power supply

  • Battery

    Around 3 years of runtime. Ideal for hard-to-reach places without a power outlet.

  • Mains power

    Continuous operation via a standard power adapter for maximum maintenance-free use.

Smart gateway with integrated display for leak monitoring

Custom

Custom designs

Custom designs are possible at any time, for example fully wired systems with an integrated display, where the cables of several zones are connected to a central gateway. Talk to us, we will find the best solution for your construction project.

Proactive safety

Intelligent remote alerting

Our system goes beyond simple sensors. It transmits data securely to the cloud and enables a flexible response to incidents, wherever you are.

  • Remote data transmission

    Real-time transmission of all readings to the central dashboard.

  • Local alarm (optional)

    Integration of acoustic sounders or flashing lights directly on site is possible.

System status

Last message: today

Online
  • Sensor Zone A (basement) Dry
  • Sensor Zone C (laundry room) Dry
  • Sensor Zone D (technical room) Dry
  • Sensor Zone B (utility room) ALARM!
Email sent SMS sent

Note: with both variants, after a moisture alarm is triggered, a simple manual measurement on the cable can precisely define the area in which the damage occurred.

Demonstration only

Infrasolute platform

All readings on the Infrasolute platform

The sensors transmit their readings to the platform. There they are continuously checked against your limit values, evaluated with AI and documented, accessible in the browser around the clock.

Platform modules

The platform at a glance
Bridge as a 3D model on the Infrasolute platform, measuring points coloured by status
Sample view

Leak monitoring for your building

Tell us which areas you want to protect. We recommend the right installation variant and get back to you promptly with a no-obligation quote.

Roman Koch Roman Koch

Applications

Typical applications

Wherever water can escape unnoticed, the leak detection cable and the water leak sensor provide a timely warning.

Single-family homes
Multi-family homes
Basements & underground garages
Technical rooms
On the screed
In insulation materials
Real-world use case

Leak detection cable for leak monitoring in wet rooms and basements

Starting situation

The owner of a multi-family building repeatedly struggled with leaks that were detected too late. They were looking for an easily retrofittable solution without major installation effort.

Implementation

Leak detection cables were laid in the wet rooms along the sanitary connections and in the basement along the pipework and connected to a central readout unit, entirely without structural work.

Result

A few weeks later, the system detected a water leak immediately. Thanks to automatic alerts by email and SMS, the damage could be repaired before the building fabric was affected.

The advantages

  • No structural work

    The leak detection cable is laid, not built in. No breaking into walls, no intervention in the building fabric.

  • Immediate alerting

    The alarm triggers on first contact with water, not only once a stain appears on the ceiling below.

  • Digital monitoring

    The status can be checked at any time, even remotely, without a walk-through of the basement.

  • Avoidance of high costs

    A leak caught early stays a tradesperson’s visit. Caught late, it becomes a full remediation.

FAQ

Frequently asked questions

Does the system need to be connected to power?
The gateway can be operated either via a mains power connection (power adapter) or with batteries. The battery version is ideal for places without a power outlet and lasts around three years.
Can I install the system myself?
Yes, installation is very simple. The leak detection cable is rolled out on the floor or along the areas at risk. No structural work and no tradespeople are required.
What happens during a power or internet outage?
The system has an integrated battery buffer and, depending on the model, uses cellular connectivity (NB-IoT or LTE-M) for data transmission. This keeps it fully functional even during a local power or Wi-Fi outage.
How long can the leak detection cable be?
The leak detection cable can usually be up to 40 m long. It cannot be extended via plug connections. However, the connection from the leak detection cable to the gateway can be extended with standard cable.
Leak detection cable or water leak sensor, which fits?
If water can escape across a whole area or along a run, the cable is the right choice because it is sensitive along its entire length. If the points of risk are known, such as a boiler room or a spot on the floor slab, one water leak sensor per point is enough, and every alert is clearly assigned. Both can be combined.

Project inquiry

Leak monitoring for your building

Tell us which areas you want to protect. We recommend the right installation variant and get back to you promptly with a no-obligation quote.

[email protected]
Project inquiry