Data centre monitoring: leaks, roof and access in view

Water under the raised floor, load on the roof, open manholes and doors: Infrasolute monitors the structural risks of a data centre with wireless sensors, retrofittable during operation, with alerts by SMS and email.

Infrasolute sensors for data centres: water leak sensor with gateway, manhole sensor, distance laser and gutter sensor, cut out

Your benefits

One system for water, roof and access

In a data centre, every minute of availability counts. Water under the raised floor, overload on the roof and an open cable manhole are three different risks. Infrasolute monitors them with one platform and one alarm chain.

Enquire now

Leaks detected on first contact with water

Leak detection cables and water leak sensors report escaping water under the raised floor and in plant rooms immediately by SMS and email, around the clock.

Roof load measured, not estimated

The deflection of the roof structure is measured by laser. With snow, heavy rain or additional plant on the roof, the warning comes before the overload.

Every opening reported

The manhole sensor reports the opening of manhole covers, doors and gates the moment it happens, with location and time.

Separate from your network

The gateways transmit over the mobile network using their own SIM. No access to the data centre network is required.

Three areas

What is monitored in a data centre

Each area has its own sensors. The alerts come together on the same platform.

Leak detection cable laid on the screed, connected to a gateway

Leak monitoring

Detect water under the raised floor early

Chilled water pipes, condensate drains and the connections of the cooling units run under the raised floor. A leak there stays invisible for a long time. The leak detection cable is rolled out along these runs and reports water along its entire length, up to 40 m per cable. At known points, such as under a pump or at a drain, a water leak sensor is enough.

  • Leak detection cable for runs and areas
  • Water leak sensor for individual, known points
  • laid during operation without construction work
Gateway for roof monitoring mounted on a wall

Roof monitoring

Measure roof load before it becomes critical

Data centres have large, often flat roofs that also carry dry coolers and plant. Snow, ponding water when drains are blocked and storms put additional load on the structure. Laser-based deflection measurement shows how much the roof deforms under the current load and raises an alarm when the defined limit states are reached. The gutter sensor on the roof gutter and downpipe records standing water, rainfall, moisture and temperature and reports a developing blockage before water backs up on the roof.

  • Deflection measured continuously
  • blocked gutters and downpipes reported, gutter sensor solar-powered
  • Thresholds defined together with you
  • retrofittable to existing roofs and readable remotely
Manhole sensor at a measuring point in operation

Manhole and access monitoring

Cable manholes, doors and gates in view

Fibre and power reach a data centre through cable manholes on the site. If a cover is lifted or a door to a plant or ancillary room is opened, the manhole sensor reports it immediately. In the same manhole, a water level sensor measures whether water is standing.

  • Opening of covers, doors and gates reported immediately
  • battery powered, without cables or a power connection
  • water level in the cable manhole recorded as well

Measuring points

Where measurements are taken in a data centre

The IT in the data hall monitors itself. The building around it needs its own sensors: where water can escape, where load acts on the structure and where someone can get in from outside.

Raised floor in the data hall

Under cooling units, along the chilled water pipes and at condensate drains.

Plant rooms

Chiller and pump rooms, boiler and utility connection rooms, with water leak sensors at known points of risk.

Roof structure

Deflection of the structure under snow, rain, wind and rooftop plant, plus gutters and downpipes with the gutter sensor.

Site and access points

Cable and fibre manholes, doors to ancillary and plant rooms, gates. Every opening is reported.

How it works

Four steps to the alert

Retrofitting takes place during operation, and transmission is separate from your IT.

  1. 01

    Define the points of risk

    Together with your operations team, we define where water can escape, which roof areas are measured and which access points should be reported.

  2. 02

    Retrofit during operation

    Leak detection cables are rolled out, sensors are mounted and the roof sensors are fixed to the load-bearing structure. No work on the building fabric and no shutdown are needed.

  3. 03

    Transmit via own SIM

    The gateways send to the Infrasolute platform over the mobile network, independently of the data centre network. With battery backup, they keep running during a local power failure.

  4. 04

    Alert and integrate

    Threshold exceedances go by SMS and email to the defined recipients, with escalation on request. Via an API, the readings can be passed to your control room.

Infrasolute platform

All readings on the Infrasolute platform

All measuring points of a data centre, and of several sites if required, on one overview map, with one alarm chain and a connection to your control room.

Platform modules

The platform at a glance
Laptop showing the overview map of the Infrasolute platform, measuring points as coloured dots by status, with the list of measuring points alongside
Sample view

Monitoring for your data centre

Tell us about the building, raised floor, roof and access points. We will propose measuring points, sensors and reporting paths.

Peter Nater Peter Nater
FAQ

Frequently asked questions about data centre monitoring

Which risks in a data centre can be monitored with sensors?
Infrasolute monitors three areas in data centres: leaks under the raised floor and in plant rooms with leak detection cables and water leak sensors, the load on the roof using laser-based deflection measurement, gutters and downpipes with the gutter sensor, and the opening of cable manholes, doors and gates with the manhole sensor. All alerts come together on one platform with one alarm chain.
How do you detect a water leak under the raised floor?
With a leak detection cable laid under the raised floor along the chilled water pipes, condensate drains and cooling units. When the cable comes into contact with water, its electrical resistance changes and the system reports the leak immediately by SMS and email. A cable can generally be up to 40 m long.
Leak detection cable or water leak sensor: which fits in a data centre?
If water can escape along a run or over an area, for example under the raised floor, the leak detection cable is the right choice because it is sensitive along its entire length. At known points of risk such as a pump or a drain, one water leak sensor per point is enough. Both can be combined in one system.
Does the monitoring need access to the data centre network?
No. The gateways transmit to the Infrasolute platform over the mobile network using their own SIM. The data centre network is not used. The platform servers are located in Germany, and the system is developed and manufactured in Germany.
What happens during a power or network outage?
The gateways have battery backup and transmit over the mobile network. They therefore remain operational during a local power or Wi-Fi outage. The sensors for manholes and access points run on batteries anyway.
How is the roof load on a data centre monitored?
Instead of weighing the load, the system measures the deformation of the roof structure. Laser-based deflection measurement shows how much the roof deforms under snow, rain, wind and rooftop plant. When predefined limit states are reached, the system raises an alarm automatically.
How are the gutters and downpipes on a data centre monitored?
With the gutter sensor. It sits on the roof gutter and records standing water, rainfall, moisture and temperature at the same time. If rain falls without the expected pattern appearing in the gutter, the system detects a developing blockage and reports it before water backs up on the roof. The sensor is solar-powered, transmits via NB-IoT and needs no battery changes on the roof.
Can the system be retrofitted during operation?
Yes. Leak detection cables are laid, not built in; water leak and manhole sensors are mounted; the roof sensors are fixed to the existing structure. No shutdown and no work on the building fabric are needed.
Can the data be passed to our control room?
Yes. Via an API, the Infrasolute platform passes readings and alerts to existing monitoring systems, for example the control room. Dashboard, data export and reports by email are also available.

Project inquiry

Let's talk about your data centre

Tell us about the site and the question at hand. You will receive an initial assessment shortly, including suitable sensors and reporting paths.

[email protected]
Project inquiry