House on Lake Constance: water leak sensors report water at the screed

Diagram: water rises from below through the floor slab to the screed, water leak sensors in two rooms are connected to a gateway, alerts by SMS and email

Project facts

Property
House on Lake Constance
Parties
Operator and expert surveyor
Task
Detect when water rises from below through the floor slab and reaches the screed
Installed sensors
Water leak sensors in several rooms, connected by cable to the gateway

At a glance

  • Property: House on Lake Constance
  • Parties: Operator and expert surveyor
  • Question: When does water rise from below through the floor slab and reach the screed?
  • Solution: Water leak sensors in several rooms, gateway, alerts by SMS and email

Challenge

When does the water reach the screed?

In a house on Lake Constance, the operator and the expert surveyor wanted to know when water rises from below through the floor slab and reaches the screed. An inspection only shows the condition on the day of the visit. What was needed was monitoring that reports around the clock, without anyone having to check regularly, and that shows in which room the water arrives.

Solution

Water leak sensors in several rooms

Infrasolute equipped several rooms with water leak sensors. Each sensor sits close to the floor at the screed, where water entering from below arrives first, and is assigned to its room on the platform. The sensor measures the electrical resistance via two probes: when water arrives, it drops sharply. It also records the moisture at its location.

The sensors are connected by cable to the gateway. It reads them every 15 minutes and transmits the values to the Infrasolute platform. If a value exceeds the threshold, the alert goes out by SMS and email. The technology behind it: the water leak sensor.

Diagram: water rises from below through the floor slab to the screed, water leak sensors in two rooms are connected to a gateway, alerts by SMS and email
How the monitoring works: water from below reaches the screed, and the sensor in the room reports it via the gateway. Schematic illustration, not measured values.

Result

Informed and alerted as soon as water enters

If water enters, the operator and the expert surveyor are reliably informed and alerted by SMS and email, naming the affected room. Nobody has to check on site to know whether and where water has arrived. The history and alert log of every sensor are available on the platform, as a basis for assessing the cause and deciding on further action.

The project shows leak monitoring with water leak sensors at individual, known points. For runs and areas there is the leak detection cable, which is sensitive along its entire length.

Specifics

Measuring points
Several rooms equipped, each sensor assigned to a room
Measurement
Water contact and moisture at the screed, every 15 minutes
Alerting
Reliably by SMS and email as soon as water enters
Platform
History and alert log of every sensor in the browser

Products in use

Sensors installed here

All products

Related solutions & industry

Solutions matching this project

Infrasolute platform

How the readings from this project are evaluated

The readings from this project come together on the Infrasolute platform. There they are checked against the defined limits, shown as trends and interpreted with AI.

Platform modules

The platform at a glance
3D model of a monitored building on the Infrasolute platform
Sample view
FAQ

Frequently asked questions: House on Lake Constance

Why water leak sensors rather than a leak detection cable?
The question was whether and when water reaches the screed from below in specific rooms. One water leak sensor per point is enough for that, and every alert is clearly assigned to a room. A leak detection cable is the better choice where water could escape along a run or across a whole area.
How quickly does the alert arrive?
The gateway reads the sensors every 15 minutes and transmits the values to the Infrasolute platform. If water reaches a sensor, SMS and email go out at the latest with the next reading, naming the affected room.
What exactly does the water leak sensor measure?
It measures the electrical resistance between two probes. When water reaches the probes, the resistance drops sharply. It also records the moisture at its location in the range of 0 to 6.5 % by mass. The history is available on the platform at any time.

Project inquiry

A comparable structure to monitor?

Describe your structure and your question. We recommend the right measuring points and suitable sensors.

Project inquiry References
Christian Steffes Christian Steffes

Project inquiry

Tell us about your structure

Structure type, location and your question are enough to start. We recommend suitable measuring points and sensors.

+49 6742 8599600 DE +41 41 670 00 11 CH [email protected]
Project inquiry