Balcony Structures on Sylt: Salt Air and Corrosion in View

Multi-storey residential building with balconies on Sylt

Project facts

Structure type
Buildings, balcony structures of a holiday apartment complex
Location
Sylt
Task
Capture corrosion and moisture on every balcony and detect damage early
Sensors installed
Energy-free corrosion and moisture sensors, connected to a gateway

Challenge

Salt water attacking before you can see it

The challenge at this balcony structure on Sylt is the saline sea water. Aggressive salt water leads to corrosion and, as a result, to structural problems that threaten the safety and service life of the structure.

On top of that comes operation: the complex consists of holiday flats whose guests are not meant to notice the monitoring.

Solution

One sensor per balcony

Infrasolute was commissioned to provide a monitoring solution for the balcony structures. Energy-free corrosion and moisture sensors were placed on every balcony to continuously capture the relevant parameters of the corrosion process and detect potential damage early.

Placement was per balcony, not sampled across the complex. Energy-free here means the sensor remains in the building element without its own power source.

Installation of a sensor on a balcony structure on Sylt Sensor on the underside of a balcony slab on Sylt
Installation on the balcony. The sensor then remains in the building element without its own power source.

Result

Data that disturbs no one

The data go out online around the clock via a gateway. This solves the decisive operational point: holiday guests are never disturbed, because no one needs to enter a flat to take a measurement.

For those responsible for the complex, this means they can respond early to corrosive influences and take targeted repair measures. The ongoing measurement lets them classify the degree of corrosion and assess its progress over time, instead of taking a one-off condition reading. This limits damage and directs maintenance to where it is needed.

The project shows how moisture and corrosion monitoring accompanies a building element permanently exposed to weather in balconies and buildings. If you have balconies, loggias or facade elements in a saline or humid environment, describe your structure to us through our project inquiry.

Specifics

Installation
Placed on every balcony, not sampled across the complex
Data route
Online 24 hours a day via a gateway
Specifics
No access to the flats needed, holiday guests remain undisturbed

Infrasolute platform

How the readings from this project are evaluated

The readings from this project come together on the Infrasolute platform. There they are checked against the defined limits, shown as trends and interpreted with AI.

Platform modules

The platform at a glance
3D model of a monitored building on the Infrasolute platform
Sample view

Project inquiry

A comparable structure to monitor?

Describe your structure and your question. We recommend the right measuring points and suitable sensors.

Project inquiry References
Christian Steffes Christian Steffes

Project inquiry

Tell us about your structure

Structure type, location and your question are enough to start. We recommend suitable measuring points and sensors.

[email protected]
Project inquiry