Munich Airport: water level monitoring in shafts via NB-IoT

Infrasolute water level sensor on the concrete wall of a shaft at Munich Airport, with the red access ladder next to it

Project facts

Structure
Shafts on the Munich Airport site
Client
Munich Airport
Reason
Standing water in a shaft goes unnoticed without an inspection round
Task
Detect water in the shaft early and raise alerts automatically
Installed sensors
Water Level Sensor, gateway with long-life battery and NB-IoT

At a glance

Logo of Munich Airport, client
  • Client: Munich Airport (Flughafen München)
  • Structure: shafts on the airport site
  • Task: detect standing water in the shaft early and raise an alert automatically
  • Solution: water level monitoring with the Water Level Sensor, gateway with long-life battery, transmission via NB-IoT
  • Platform: thresholds, email alerts, rainfall data, PDF reports and an API to the operator’s control system

Challenge

Water in the shaft, with no one there to see it

An airport has a large number of shafts on its site. If water collects in one of them, it often goes unnoticed until someone opens the cover during an inspection round. Until then, standing water can damage pipes, equipment and structural components in the shaft. Regular inspection rounds are time-consuming at an airport. Many shafts are in areas that cannot simply be driven into, and there are usually no power or data lines.

Munich Airport therefore wanted to know when water is standing in a shaft, without having to send someone out to check.

View from above into a concrete shaft at Munich Airport: red access ladder, the gateway at the top of the wall, the water level sensor lower down on the wall, water on the floor
View into the shaft: the gateway at the top, the water level sensor on the wall above the shaft floor.

Solution

IoT shaft monitoring with the Water Level Sensor

Infrasolute mounted the Water Level Sensor on the shaft wall above the floor. It monitors the water level continuously and reports as soon as water reaches the set threshold. Its design is robust and resistant to dirt, damage and clogging, so it works reliably under the conditions found in a shaft.

The sensor is connected by cable to a gateway at the top of the shaft. The gateway runs on a long-life battery and transmits via NB-IoT (Narrowband IoT). NB-IoT has a long range and good penetration into buildings and shafts, so the connection works even under the cover. The enclosure is waterproof to IP67. Up to eight water level sensors can be connected to one gateway.

Infrasolute water level sensor on the concrete wall of a shaft, mounted on a stainless steel plate, cable running up to the gateway, the red access ladder on the right
The water level sensor on the shaft wall, just above the floor. The cable runs to the gateway.

8

water level sensors possible per gateway

NB-IoT

transmission without power or data lines

IP67

waterproof gateway enclosure

2× a day

data transmission, interval adjustable

Grey Infrasolute gateway enclosure on the rusty concrete wall at the top of the shaft, with a rail of the red access ladder in front
The gateway at the top of the shaft: long-life battery, NB-IoT, IP67 enclosure.

Platform and alerting

Water level and rainfall in one chart

The readings are sent to the Infrasolute platform, where the shafts are located on a map, thresholds are set and all time series are stored. The platform adds rainfall and temperature from the nearest weather station, so it is immediately clear whether a rise in water level is linked to rain.

The chart covers the weeks from mid-May to mid-June 2024. Until 1 June, the water level sensor reports no water above the threshold. According to the weather data, around 37 mm and 57 mm of rain fell on 31 May and 1 June. From 2 June, the sensor reports water in the shaft, and the platform issues a warning and sends an email.

Infrasolute platform chart from mid-May to mid-June 2024: green dots for the water level status, at level 1 from 2 June, grey line for rainfall with a peak of around 57 mm on 1 June
Water level status (green, 0 = below the threshold, 1 = water detected) and rainfall from the nearest weather station (grey, in mm).

The platform displays the data as charts and tables, and the data can be exported at any time. Via an API, the readings can also be passed to the operator’s monitoring system. On request, the platform sends PDF reports by email at a set interval, showing the status and development over the past weeks. More on this: monitoring and alerting.

Benefit for the client

Alerts instead of inspection rounds

Munich Airport learns remotely when water is standing in a shaft and can react early. Inspection rounds in which nothing has changed are no longer needed. The system needs no power or data lines to the shaft. Further shafts can be added with additional sensors on the same gateway or with further gateways.

Airport infrastructure

What else can be monitored at an airport

Shafts are only one part of the infrastructure on an airport site. The same platform and wireless sensors can cover further tasks:

Water level sensor on a concrete wall above water Solution Water level monitoring Monitor water levels in shafts, basins and watercourses wirelessly, with automatic alerting. To water level monitoring → Manhole sensor for monitoring shafts in supply infrastructure Industry Supply infrastructure Wireless monitoring of shafts, pipes and structures for municipalities, utilities and infrastructure operators. To the industry page →

Specifics

Transmission
NB-IoT, no power or data lines to the shaft
Expansion
up to eight water level sensors per gateway
Alerting
warning and email when the threshold is reached
Evaluation
rainfall from the nearest weather station in the same chart

Infrasolute platform

How the readings from this project are evaluated

The readings from this project come together on the Infrasolute platform. There they are checked against the defined limits, shown as trends and interpreted with AI.

Platform modules

The platform at a glance
Laptop showing the overview map of the Infrasolute platform, measuring points as coloured dots by status, with the list of measuring points alongside
Sample view
FAQ

Frequently asked questions: Water level monitoring Munich Airport

How does Munich Airport monitor its shafts for water?
An Infrasolute water level sensor is mounted on the shaft wall above the floor. It reports as soon as water reaches the set threshold. A gateway at the top of the shaft transmits the readings via NB-IoT to the Infrasolute platform, which issues a warning and sends an email when the threshold is exceeded.
Does shaft monitoring need power or data lines?
No. The gateway runs on a long-life battery and transmits via NB-IoT over the mobile network. NB-IoT has a long range and good penetration into shafts, so the connection works even under the cover.
How often are the data transmitted?
In the Munich Airport project, the gateway transmits twice a day. The interval can be adapted to the operator’s requirements.
How many water level sensors can be connected to one gateway?
Up to eight water level sensors can be connected to one gateway. Further shafts are added with additional gateways and appear on the same map on the platform.
Can the data be passed to the airport’s control system?
Yes. The Infrasolute platform passes the data to the operator’s monitoring system via an API. Charts, tables, data export and PDF reports by email are also available.

Project inquiry

A comparable structure to monitor?

Describe your structure and your question. We recommend the right measuring points and suitable sensors.

Roman Koch Roman Koch

Project inquiry

Tell us about your structure

Structure type, location and your question are enough to start. We recommend suitable measuring points and sensors.

[email protected]
Project inquiry